New Replacement Motor Drive Belts DELTA 5140043-25 

Set of 3 V Belts for Delta Saw

Price is for 3 Belts with USA FREE SHIPPING by USPS to ALL 50 STATES 

3/16" Diameter Round Urethane Belt Roll, Solid Core Type, Orange, Smooth Texture, Hardness Shore A 85, Overall Length available in rolls of 50 ft. Minimum Pulley Dia. 1.6 In. , Temp. Range -22 Degrees to 150 Degrees F, Standard FDA Grade. High Quality Polybelt Made in USA

3 Ribs VBelt 3/5-M-1500 Gates Polyflex V-Belt 3/5M1500

0.6" Top Width of each rib, 55.06" Effective Length

Ribbed Backing provides greater lateral stability and relieves bending stress

The working temperature range is -65 to +180 degrees F

In Stock

3/8" Round Urethane Belt Roll, Solid Core Type, Orange, Smooth Texture, Hardness Shore A 85, Overall Length available in rolls of 50 ft. Minimum Pulley Dia. 3.5", Temp. Range -22 Degrees to 150 Degrees F, Standard FDA Grade

34RPP5-15 Steel Timing PULLEY bore prepaired for 1008 POGGILOCK SYSTEM P TAPER BUSHING, 34 Tooth for RPP5-15 belt, POGGI P/N 53F034015P PL34RPP515-8RF

34RPP8-30 Steel Timing PULLEY bore prepared for 3825 POGGILOCK SYSTEM P TAPER BUSHING Italy, 34 Tooth for RPP8-30 belt, POGGI P/N 52G034030 B34RPP830-3AF

38-8M-20 Steel Timing PULLEY prepared for 3825 POGGILOCK SYSTEM P TAPER BUSHING Italy, 38 Tooth for 8M-20 belt, POGGI P/N 33G038020 B38-8M-20-3AF

3V400 DRIVE V BELT 

3V400 belt is a 3/8" top width, 40-inch outer circumference (OC) wedge V-belt

3VX425 3VX-425 V-Belt Mitsuboshi MaxStar Wedge Supreme Cogged Wedge VBeltCogged Wedge VBelt

0.38" Top Width 42.5" Outside Length. 0.31" Thick

High Quality Belt Made by MITSUBOSHI of Japan

3VX450 3VX-450 V-Belt ContiTech PowerSpan Wedge Supreme Cogged Wedge V Belt. 459M96

0.38" Top Width 45" Outside Length. 0.31" Thick

High Quality Rubber Belt Made by Contitech Continental of Germany

Replacement for Sears Craftsman Model # 113.298030  

2 Pairs (4) High Quality Bearings for the 10" Table Saw Arbor Balde

USA FREE SHIPPING by USPS to All 50 States

473 Foot ROLL H200 Polyurethane with Steel Cords Timing Belt Roll Open End, 2" Wide

Replacement Belt for EMCO Compact 8 Lathe 8x18 5-M-690 Polyflex V-Belt 5M690

Fits 8X18 EMCO Compact 8 lathe with V Belt

Order a Spare & Save

USA FREE SHIPPING by USPS to ALL 50 STATES

5/16" Diameter Round Urethane Belt Roll, Solid Core Type, Orange, Smooth Texture, Hardness Shore A 85, Overall Length available in rolls of 50 ft. Minimum Pulley Dia. 3.0 Inch, Temp. Range -22 Degrees to 150 Degrees F, Standard FDA Grade

Round Urethane Belt, Core Type Solid, Orange, Texture Smooth, Hardness Shore A 85, Diameter 5/64 In., Overall Length available in rolls of 50 ft., Min. Pulley Dia. 1-1/2 In., , Temp. Range -22 Degrees to 150 Degrees F, Standards FDA

Non-Reinforced Round Belting is constructed of solid polyurethane with an 85 Shore A durometer that provides excellent abrasion resistance, high elasticity, and is also self-tensioning.

Toothed Belt Green Order in pairs only

Made to order belt

506XL Toothed BELT for ST3000 RAYMARINE AUTOPILOT, Also fits some Navico WP 5000 Modles, Black, 1285mm Long. Please measure your old belt length before ordering.

530-5M-12 Red Silicon Timing Belt High Temperature High Release 530mm Long, 106 Tooth, 12mm Wide

580XL Toothed BELT for ST3000 RAYMARINE AUTOPILOT, Also fits some Simrad Navico WP5000 Models, Black, 1473mm Long. Please measure your old belt length before ordering.

VBelt 5-M-1500 V-Belt 5M1500

3/16" Top Width, 55.06" Effective Length 

Neothane Ribbed Backing provides greater lateral stability and relieves bending stress

The working temperature range is -65 to +180 degrees F