Aluminum Timing Pulley Bar Stock 18 Tooth, H pitch, 10" Usable Length. OD=2.811"

18H Steel Timing Pulley Bar Stock 18 Tooth, H pitch, 10" Usable Length. OD=2.811"

19H Aluminum Timing Pulley Bar Stock 19 Tooth, H pitch, 10" Usable Length. OD=2.970"

Aluminum Timing Pulley Bar Stock 23 Tooth, H pitch, 10" Usable Length. OD=3.607"

24H Aluminum Timing Pulley Bar Stock 24 Tooth, H pitch, 10" Usable Length. OD=3.766"

25H Aluminum Timing Pulley Bar Stock 25 Tooth, H pitch, 8" Usable Length. OD=3.925"

25H Aluminum Timing Pulley Bar Stock 25 Tooth, H pitch, 10" Usable Length. OD=3.925"

26H Aluminum Timing Pulley Bar Stock 26 Tooth, H pitch, 8" Usable Length. OD=4.084"

26H Aluminum Timing Pulley Bar Stock 26 Tooth, H pitch, 12" Usable Length. OD=4.084"

Aluminum Timing Pulley Bar Stock 27 Tooth, H pitch, 10" Usable Length. OD=4.243"

Aluminum Timing Pulley Bar Stock 29 Tooth, H pitch, 10" Usable Length. OD=4.561"

30H Aluminum Timing Pulley Bar Stock 30 Tooth, H pitch, 10" Usable Length. OD=4.721"

30H Aluminum Timing Pulley Bar Stock 30 Tooth, H pitch, 12" Usable Length. OD=4.721"

Aluminum Timing Pulley Bar Stock 31 Tooth, H pitch, 10" Usable Length. OD=4.882"

32H Aluminum Timing Pulley Bar Stock 32 Tooth, H pitch, 10" Usable Length. OD=5.039"

34H Aluminum Timing Pulley Bar Stock 34 Tooth, H pitch, 10" Usable Length. OD=5.357"

36H Aluminum Timing Pulley Bar Stock 36 Tooth, H pitch, 10" Usable Length. OD=5.676"

H037 Polyurethane Timing Belt Roll with Steel Cords Open End, 3/8" Wide, Price is per linear foot.

Sold in pairs only; If you order 20 feet , you will recive 2 rolls of 10 feet

Aluminum H050 Belt Clamp Plate. To be used with H050 1/2" wide Timing Belts. Clamp Plates are always wider than the belt width to allow for mounting holes to be drilled. Avoid drilling holes through the belt since it will weaken belt strength. Clamps comes standard with No Holes.

H050 Neoprene Black Rubber Timing Belt, 0.5" wide 201" Long